-
PVC valve plastic valve body light corrosion resistance
The types of plastic valves in the world mainly include ball valve, butterfly valve, check valve, diaphragm valve, gate valve and globe valve. The structural forms mainly include two-way, three-way and multi way valves. The raw materials mainly include ABS, PVC-U, PVC-C, PB, PE, PP and PVDF. In t...Read more -
Plastic ball valve materials, do you really know？
Plastic ball valve is mainly used to cut off or connect the medium in the pipeline, but also used for the regulation and control of fluids. Ball valve has many advantages, such as low fluid resistance, light weight, compact and beautiful appearance, corrosion resistance, wide range of application...Read more -
When purchasing plastic valves, remember these three points
The ball valve must be used in the pipeline to transfer fluid, so as to control the flow of fluid. However, among the fluids made of all materials, the ball valves made of different materials have different performances. The plastic ball valves are easy to operate because of their small size and ...Read more -
Types and advantages of plastic pipes
The pipes of COMPACT BALL VALVE are a kind of common building materials, which are loved by many customers for their excellent characteristics and high cost performance. Therefore, today, we will start with the classification of plastic pipes, and let everyone know about plastic pipes. At this st...Read more -
What are the advantages of plastic faucets
There are many materials for faucets on the market. In addition to the common stainless steel faucets, plastic faucets are also widely used. So what are the advantages and disadvantages of plastic faucets? How to choose plastic faucets? Let’s take a look: What are the advantages and disadva...Read more -
Butterfly valve structure principle and applicable occasions
Two major analysis of butterfly valve installation points: the installation position, height, and direction of inlet and outlet must meet the design requirements. Note that the direction of medium flow should be consistent with the direction of the arrow marked on the valve body, and the connecti...Read more -
Common problems and precautions in the maintenance of plastic valves
Daily valve maintenance 1. The valve should be stored in a dry and ventilated room, and both ends of the passage must be blocked. 2. Valves that have been stored for a long time should be checked regularly, the dirt should be removed, and anti-rust oil should be applied to the processing surface....Read more -
What are the three commonly used plastic materials
Be sure to say three, it should be: PPR, PVC, PE 1. Commonly used plastic pipes are: PPR (polypropylene), PVC (polyvinyl chloride), PB (polybutene), PE-RT (heat-resistant polyethylene), PE (polyethylene) \HDPE (reinforced high-density polyethylene) ethylene), etc. Second, the size of plastic pipe...Read more
