Type:Floor Heating Parts
Floor Heating Part Type:electric thermal actuator
Outer shell material:PC
Control components (T):Electric heating wax sensor
The thrust F and the direction:110N > F ≥ 80N, direction: upward (NC) or downward (NO)
Connecting sleeve:M30 x 1.5mm
Ambient temperature (X):-5 ~ 60 ℃
First running time:3 min
Total stroke:3 mm
Protection class:IP54
Consumption:2 Watt
Power wiring:1.00 meter with two core
parameter
Technical Parameter | |
Voltage | 230V (220V) 24V |
Status | NC |
Power Consumption | 2VA |
Thrust | 110N |
Stroke | 3mm |
Running time | 3-5min |
Connection size | M30*1.5mm |
Ambient temperature | From -5degree to 60degree |
Cable Length | 1000mm |
Protective housing | IP54 |
process
Raw Material, The mould, Injection molding, Detection, The installation, Testing, The finished product, Warehouse, shipping.
Thermal Actuator
Used in conjuction with room thermostats and all our wiring centres. Actuators open or close ports on the manifold when there is a demand from a thermostat.
The thermal actuator is used with electrical on/off-controls to activate several types of valves and floor heating manifolds. The actuator is equipped with a visual position indicator to show the open or closed position of the valve. Our actuators can be provided with connections for for valves with M30x1.5 connection.Actuators are made for either 24 V (SELV) , 110V, 230 V or 240 V supply in both normally closed (NC) or normally open (NO) versions (valve positions with no supply voltage to the actuator).